Eaton - Zero 88 Logo

RGB Faders on ORB Series & Solution Series

Some users with LED units like to store Red on one fader, Green on another, and Blue on another, so they can manually colour mix using faders (for example, push the Red and Blue Playback faders up to get Magenta).

To create RGB faders on Playbacks, this is the process you need:

(we're assuming Tracking is on, with Smart Tag off)

 

- Turn the fixture (or multiple fixtures) on, and change to red (or other colour)

- Untag all the other colours by holding down CLEAR and jogging the wheels of these colours (the background on the LCD should go from white, meaning tagged, to blue, meaning untagged).

- Record this to a Playback

- Hold SETUP and press the flash button of the Playback to open the 'Playback Settings' window. Under Fader Controls... Select Colour, and press OK.

- Repeat this process for the other colours

- Finally, select your fixtures included in the colour mix playbacks and put their Red, Green & Blue values to 0%.

Press RECORD ->  HOME -> Default.

The faders will now allow you to colour mix for your recorded fixture.