Eaton - Zero 88 Logo

Start Up Tool

In the unlikely event your ZerOS console fails to boot, there is a recovery method using the Startup Tool:

  • Plug in a USB keyboard, and turn your console on. Immediately keep tapping the F1 key until you see the below screen:

  • Then click “Clear Show Data”, and restart your console. This will completely remove the showfile, which may be corrupted causing the console to fail to boot. Therefore if you want to try and recover your show data later tap "Backup Desk to USB" first.

 

  • If it doesn’t work, repeat the above process, but choose "Update Software". This will give you a warning, where you can click OK. You will then be able to select a software file (.exe) from a USB stick to reinstall the software. Again this will remove the show file.